Engine - GM (19435440)
THE FOUNDATION FOR A HIGH-REVVING 350 SMALL-BLOCK!
Our SP350/385 crate engine incorporates modern technologies such as a beehive-type valve springs to take the classic 350 Small-Block to new levels of high-rpm performance - without sacrificing the signature torque that has made it the benchmark of V-8 engines for nearly half a century.
In fact, the 385 hp rating of the engine is complemented by excellent low-rpm torque, with the SP350/385 generating 405 lb.-ft. of torque at 3,600 rpm. It's all due to the high-flow, lightweight aluminum cylinder heads. They're based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. The beehive valve springs enable greater high-rpm performance and durability, allowing the engine to rev higher to make the most of every cubic foot of air drawn through it.
As with all of Chevrolet Performance's Small-Block crate engines, the SP350/385 is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and durable, highsilicon pistons. In this value-driven Base crate engine package, it also includes the intake manifold, distributor, water pump, damper and flexplate. Other accessories are required to finish it - all available from Chevrolet Performance.
TECH SPECS
Part Number: 19333157
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10243870): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Powdered metal
Pistons (P/N 10159436): Hypereutectic aluminum
Camshaft Type (P/N 10185071): Hydraulic roller
Camshaft Lift (in): .474 intake / .510 exhaust
Camshaft Duration (@.050 in): 208° intake / 221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1 nominal
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36? Total @ 4,000 rpm
Maximum Recommended rpm: 5,800
Balanced: External
Flexplate (P/N 14088765): 12.750"
Intake Manifold (P/N 12366573): Dual Plane
INSTALLATION NOTES
- Use the Holley 770-cfm 4-barrel carburetor P/N 19170093 to achieve the listed horsepower and torque
- Requires four-barrel carburetor, spark plug wires and additional components to complete assembly
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Requires fuel line from fuel pump to carburetor
- Designed for pre-1976 street vehicles or any off-road vehicle
- Some assembly and minor engine tuning required
- Not intended for marine applications
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
THE FOUNDATION FOR A HIGH-REVVING 350 SMALL-BLOCK!
Our SP350/385 crate engine incorporates modern technologies such as a beehive-type valve springs to take the classic 350 Small-Block to new levels of high-rpm performance - without sacrificing the signature torque that has made it the benchmark of V-8 engines for nearly half a century.
In fact, the 385 hp rating of the engine is complemented by excellent low-rpm torque, with the SP350/385 generating 405 lb.-ft. of torque at 3,600 rpm. It's all due to the high-flow, lightweight aluminum cylinder heads. They're based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. The beehive valve springs enable greater high-rpm performance and durability, allowing the engine to rev higher to make the most of every cubic foot of air drawn through it.
As with all of Chevrolet Performance's Small-Block crate engines, the SP350/385 is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and durable, highsilicon pistons. In this value-driven Base crate engine package, it also includes the intake manifold, distributor, water pump, damper and flexplate. Other accessories are required to finish it - all available from Chevrolet Performance.
TECH SPECS
Part Number: 19333157
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10243870): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Powdered metal
Pistons (P/N 10159436): Hypereutectic aluminum
Camshaft Type (P/N 10185071): Hydraulic roller
Camshaft Lift (in): .474 intake / .510 exhaust
Camshaft Duration (@.050 in): 208° intake / 221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1 nominal
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36? Total @ 4,000 rpm
Maximum Recommended rpm: 5,800
Balanced: External
Flexplate (P/N 14088765): 12.750"
Intake Manifold (P/N 12366573): Dual Plane
INSTALLATION NOTES
- Use the Holley 770-cfm 4-barrel carburetor P/N 19170093 to achieve the listed horsepower and torque
- Requires four-barrel carburetor, spark plug wires and additional components to complete assembly
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Requires fuel line from fuel pump to carburetor
- Designed for pre-1976 street vehicles or any off-road vehicle
- Some assembly and minor engine tuning required
- Not intended for marine applications
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Shipping Policy
- In stock orders ship within 24 hours.
- Weekend orders will be processed the next business day.
- If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-6 business days to arrive and will shipped to you immediately.
- Depending upon location, ground shipments usually take 2-7 days.
- Your order may be shipped Overnight for an additional cost.
- Oversized shipments will be additional; you will be contacted prior to shipping for approval.
- We cannot guarantee transit times for ground and oversize orders.
- Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost to the customer.
- We do not ship internationally.
- In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
- We do not ship COD orders.
Return Policy
- Contact us to arrange for any returns.
- A copy of the invoice will need to be included with the return.
- There is a 15% restocking fee charged against all returned parts.
- Parts must be resaleable and in the original packaging.
- We cannot take back used parts.
- We cannot take back installed or tried parts.
- Electrical parts are not returnable.
- We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
- Return request need to be within 30 days of receipt.
Cancellation Policy
- An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
- If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
Searching for somewhere you can trust purchasing genuine parts and accessories for your GM vehicle online? You've come to the right place! Mike Castrucci Chevrolet Parts is your go-to online retailer for original GM parts and accessories.